In case of Blanket and Grove finish, it is
a easy solution to renovate with old texture
coating if it has a good adhesion. The base
coat of Bassara may cover the roughness of
old texture with a proper primer.
As to the details of a job procedure and
specification, please be consulted with your
local Interdeco distributor.
The applicator must need a special skill
when he creates any pattern of Bassara. The
patterns is made by the applicator’s sense,
and it is relied on the finish. As to the
details about the skillful applicator and
his availability, please contact to your
local Interdeco distributor.
When Roller made pattern texture such as
Lava finish, Savanna finish, Plank finish,
Glacier finish, and Leaves finish, it is
required to have a masking for 2nd texture
coat where the roller can not work such as
at the corner, edge, or any narrow parts.
1 - Because of round shape of pattern roller,
it can not reach the corner part.
2 - Red part is required to have a masking
tape on 1st texture coat which width must
be over 2 cm from the edge. After taking
off the masking tape, 1st texture coat is
appeared.
Please consider the masked place which may
be like joint line after the finish of all
application.